PIAGGIO NRG 50 User Manual page 117

NRG 50
Engine
- Place the hub cap on the specific tool and drive
the shaft onto the previously mounted bearing
from above using the press.
Specific tooling
020452Y Tube for removing and refitting the
driven pulley shaft
- Before fitting the seeger ring, make sure it is con-
vex side facing the bearing.
- Fit the seeger ring.
- Fit the new oil seal on the outer side of the cover
using the specific tool.
Specific tooling
020376Y Sleeve for adaptors
020439Y 17-mm guide
020358Y 37 x 40 mm Adaptor
ENG - 117