NordicTrack C3 Si User Manual page 11

11. Identify the Right Pedal (21), which is marked
with an "R." Using an adjustable wrench, firmly
tighten the Right Pedal clockwise into the Right
Crank (23).
Tighten the Left Pedal (not shown) counter-
clockwise into the Left Crank (not shown).
IMPORTANT: Tighten both Pedals as firmly
as possible. After using the exercise cycle
for one week, retighten the Pedals.
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
strap onto the tabs on the Right Pedal. Adjust
the strap on the Left Pedal (not shown) in
the same way.
12. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly
is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
11
11
23
21
Strap
Tab