Radar Connection Box (Option) - Furuno ECDIS FMD-3200 Installation Manual

2.6

Radar Connection Box (option)

The RCB-002 is capable of connecting the FMD-3×00 with up to two external radar
systems. Referring to the figure below, connect the respective equipment to the RCB-
002.
NETWORK
To HUB-3000
MOD-WPAS0001-030+
(3 m) cable
Connecting LAN cables
When connecting LAN cables (MOD-WPAS0001-030+) to the RCB-002, use the fol-
lowing procedure.
1. Unfasten and remove the sealing nut from the
NETWORK port on the RCB-002, then re-
move the seal assembly. See the right figure
for reference.
2. Dismantle the seal assembly as shown below.
Dismantling the seal assembly
RADAR SIGNAL IN No.1
To external radar
MJ-A10SPF0020A (5m, 10 m, 20 m, 30 m) cable
RADAR SIGNAL IN No.2
To external radar
MJ-A10SPF0020A (5m, 10 m, 20 m, 30 m) cable
POWER
To PR-240
MJ-A3SPF cable
Unused
STEP 1:
Hold the larger diameter end of the
seal assembly with both thumbs
while placing index fingernails
between the seal and the claw.
Use caution to avoid injury.
STEP 2:
Using your thumbs, gently push the
seal out of the claw.
To ship`s ground
Ground cable, IV-1.25sq.
Seal assembly
Claw
Seal nut
2. WIRING
Seal
2-37