Fuse Replacement - Tenmars TM-86 User Manual

5.3. FUSE REPLACEMENT

Before replacing fuses, disconnect test leads
from any energized circuit to avoid electrical
shock.
Fig. 12: Fuse replacement
CAUTION
LEGEND:
1.Turn OFF the meter
and disconnect the test
leads from the input
terminals.
2.Unscrew the four fixing
screws of the back
holster and remove it.
3.Remove the defective
fuse and install a new
fuse of the same size
and rating (fast
10A/600V Busman
type). Make sure the
new fuse is centered in
the fuse holder. Re-
screw the back holster
EN - 29
TM-86