Backlight Key ( ); Auto Power Off; Measurements; Dc Voltage Measurement - Tenmars TM-86 User Manual

position and to select between AC and DC current
measure.
4.2.5. Backlight key (
By pressing
backlight function on the display. The function
automatically disabled itself after some seconds and
is available on each position of the rotary selector

4.2.6. Auto power off

The instrument automatically turns off 15 minutes
after the last pressure of keys or the last selector
rotation. To resume operation pressing HOLD key or
turn the selector on OFF and turn on the instrument
again.

4.3.MEASUREMENTS

4.3.1. DC Voltage measurement

The maximum input for DC voltage is 600V.
Do not attempt to measure higher voltages to
avoid electrical shocks or damages to the
instrument.
key it's possible to activate the
EN - 13
)
CAUTION
TM-86