Resistance Measurement - Tenmars TM-86 User Manual

4.3.5. Resistance measurement

Before taking resistance measurements on
the circuit remove power from the circuit
being tested and discharge all capacitors.
Fig. 6: Using the instrument for Resistance measurement
1.Selecting the position .
2.Pressing the R key to select the correct range or
using the Auto range feature (see paragraph 4.2.2).
If the resistance value under test is unknown, select
the highest range.
3.Insert the test leads into the jack, the red plug into
jack and black plug into COM jack (see Fig. 6).
CAUTION
EN - 19
TM-86