Fuse Replacement; Cleaning; End Of Life - Tenmars TM-87 User Manual

5.3.

FUSE REPLACEMENT

Before replacing fuses, disconnect test leads from any energized circuit to
avoid electrical shock.
5.4.

CLEANING

To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.
5.5.

END OF LIFE

Caution: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.
CAUTION
Fig. 11: Fuse replacement
19
LEGEND:
1. Turn OFF
disconnect the test leads from the
input terminals.
2. Unscrew the four fixing screws of
the back holster and remove it.
3. Remove the defective fuse and
install a new fuse of the same size
and rating
Bussmann type). Make sure the
new fuse is centered in the fuse
holder. Re-screw the back holster.
TM-87/TM-88
the meter and
(fast 10A/1000V