Preliminary - Tenmars TM-86 User Manual

Danger high voltage: risk of electric shocks
Double insulated meter
AC voltage or current
DC voltage or current

1.1. PRELIMINARY

 This instrument has been designed for use in
environments of pollution degree 2.
 It can be used for VOLTAGE and CURRENT
measurements on installations of over voltage CAT III
1000V and CAT IV 600V.
 This instrument is not suitable for measurements of
non sine wave voltage and current.
 When using the instrument always respect the
usual safety regulations aimed at protecting you
against the dangerous electric currents and
protecting the instrument against incorrect
operations.
 Only the leads supplied with the instrument
guarantee compliance with the safety standards in
force. They must be in good conditions and, if
necessary, replaced with identical ones.
EN - 4
TM-86