Tenmars TM-86 User Manual page 27

Fig. 11: Using the instrument for Capacitance measurement
1. Selecting the position .
2. Insert the test leads into the jacks, the red plug into
jack and black plug into COM jack (see Fig.
11).
3. Connect the red and black test clamps to the
capacitor terminals respecting if necessary the
proper polarities. The capacitance value is shown
on display.
4. If the message "O.L" is displayed the maximum
readable value is reached.
5. For HOLD function and Relative measure please
refer to paragraph 4.2.
EN - 26
TM-86