3. Insert the test leads into the jacks, the red plug
into
Fig. 3).
4. Connect the test leads to the circuit under test.
The voltage value is displayed.
5. If the message "O.L" is displayed select a higher
range.
6. For HOLD function and Relative measure please
refer to paragraph 4.2.
4.3.3. DC Current measurement
The maximum input for DC current is 10A.
Do not attempt to measure higher currents
to avoid electrical shocks or damages to
the instrument.
Fig. 4: Using the instrument for DC Current measurement
jack and black plug into COM jack (see
EN - 16
CAUTION
TM-86