Ford EVEREST 2009 Manual page 61

EVEREST_F8M7-10-09B_Edition1 Page61
Tuesday, February 10 2009 12:54 AM
Replacing the transmitter battery
1. Insert a small flathead screwdriver into
the slot and gently pry open the
transmitter.
Slot
2. Press the portion of the battery
indicated by A and remove the battery.
Form No.F8M7-10-09B
3. Install a new battery (CR2025 or
equivalent) into the front portion of the
holder with the positive pole (
facing up. Press on the B portion of the
battery to set the battery.
Back cover
Front
cover
4. Align the front and back covers and
snap the transmitter shut.
qService
If you have a problem with the keyless
entry system, consult an expert repairer,
A
we recommend an Authorised Ford
Repairer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorised Ford Repairer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
Black plate (61,1)
Knowing Your Ford
Doors and Locks
B
CAUTION
)
Back cover
Front of
holder
3-5