Ford EVEREST 2009 Manual page 241

EVEREST_F8M7-10-09B_Edition1 Page241
Tuesday, February 10 2009 12:55 AM
1. When replacing the rear window wiper
blade rubber, move the wiper arm
using the rear window wiper knob to
position the wiper arm in a place away
from the spare tyre.
2. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Plastic locking clip
CAUTION
To prevent damage to the rear window
let the wiper arm down easily, don't let
it slap down on the rear window.
Form No.F8M7-10-09B
Black plate (241,1)
Owner Maintenance
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
Maintenance and Care
8-27