Ford EVEREST 2009 Manual page 201

EVEREST_F8M7-10-09B_Edition1 Page201
Tuesday, February 10 2009 12:55 AM
WARNING
Use only the front and rear jacking
positions recommended in this
manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone.
Use only the jack provided with your
Ford:
Using a jack that is not designed for
your Ford is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
5. Insert the jack lever into the jack.
Form No.F8M7-10-09B
Black plate (201,1)
In Case of an Emergency
6. Turn the wheel brace clockwise and
raise the vehicle high enough so that
the spare tyre can be installed. Before
removing the wheel nuts, make sure
your Ford is firmly in position and that
it cannot slip or move.
7. Remove the wheel nuts by turning
them anticlockwise; then remove the
wheel and centre cap.
qMounting the Spare Tyre
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
Flat Tyre
7-9