Ford EVEREST 2009 Manual page 148

EVEREST_F8M7-10-09B_Edition1 Page148
Tuesday, February 10 2009 12:54 AM
Interior Comfort
Air-Conditioning System
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function
when the outside temperature
approaches 0 °C.
Air intake selector
This lever controls the source of air
entering the vehicle.
It is recommended that under normal
conditions the lever be kept in the outside
air position.
Outside air position (
Outside air is taken into the vehicle. Use
this position for normal ventilation and
heating.
Recirculated air position (
Outside air is shut off. Air within the
vehicle is recirculated.
This position can be used when driving on
a dusty road or in similar conditions. It
also helps to provide quicker cooling of
the interior.
6-8
Form No.F8M7-10-09B
Do not use the
or rainy weather:
Using the
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
qHeating (Type A)
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
hot position.
4. Set the fan control dial to the desired
speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
l
)
l
)
l
Black plate (148,1)
WARNING
position in cold
position in cold or
If the windscreen fogs up easily, set
the mode selector dial to the
position.
If cooler air is desired at face level,
set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).