Ford EVEREST 2009 Manual page 149

EVEREST_F8M7-10-09B_Edition1 Page149
Tuesday, February 10 2009 12:54 AM
qCooling (With Air Conditioner)
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
CAUTION
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-30).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner off
(page 7-12).
Form No.F8M7-10-09B
Black plate (149,1)
Air-Conditioning System
NOTE
When maximum cooling is desired,
l
set the temperature control dial to the
extreme cold position and set the air
intake selector to the
then set the fan control dial to
position 4.
(Type A)
If warmer air is desired at floor level,
l
set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
The air to the floor is warmer than
l
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
qWindscreen Defrosting and
Defogging
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
Interior Comfort
position,
6-9