Yeswelder CT2050 Operator's Manual page 47

Wire-drive Welding Torch Operation
YesWelder CT2050 is equipped with an analog control wire-drive welding torch .
Wire-drive welding torch is usually applied while it's under TIG.
Connect the wire-drive torch to the welder front panel pedal controller connection aviation socket through dedicated cable. See Fig
Ÿ
below:
The torch switch mode
Ÿ
ing current through front panel and start welding. The welding current can be adjusted through torch potentiometer. The allowable
max current is the preset peak current value.
Torch Switch
Pulse
Analog Regulation Type
Analog Regulation Type Torch Socket Interface
needs being set to remote when using analog regulation torch function. Preset the max weld-
Current Regulation
potentiometer
Fig 29
Fig 30
44