Yeswelder CT2050 Operator's Manual page 34

CNC Setting
YesWelder CT2050 is suitable for CNC automatic cutting and have CNC interface port. Great for making precision cuts that are im-
possible to get with a hand-held tool in auto repair, machine fabrication, and construction.
CNC Voltage Connector:
2-pin control socket, connection of CNC communication signals showing arc voltage output, pin1 is positive, pin 2 is negative, com-
patible with CNC table with ARC voltage feedback ratio 1:1.
CNC Signal Control: 4-pin control socket, switch control signal output, pin 1 and pin 2 for switch start/stop signals respectively, pin 3
and pin 4 for arc generating success signals.
Cutting Features
"Blowback" Arc Start
"Blowback" Arc or Non-High frequency uses the air pressure "blows back" a conductor held open by spring tension. Overcoming
the spring tension and forcing the conductor back onto its seat, completing the pilot arc circuit.
The "blow-back" start comes without interference, is safe and ideal for general use, and is friendly to the surrounding electrical ma-
chine and human health.
Non-touch Pilot Arc
The pilot arc torch efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
Pilot arc technology allows cutter to cut without touching the tip of the metal, for better quality and longer consumable life.
PFC (Power Factor Correction) Technology
The CT2050 welder&cutter comes with PFC technology, could work with 96-265V.
Ÿ
It helps to reduce energy consumption and costs as it maximizes real power drawn from the grid supply, reducing energy and inef-
Ÿ
ficiency. Thus saving electricity while stabilizing welding performance for a consistent output. Primarily, it ensures a stable cutting
process with fluctuating voltage in the mains, using long extension cables.
96V-265V wide voltage range means the device can be used worldwide on construction sites.
Ÿ
Back Connection
31
1 2
4
3