Yeswelder CT2050 Operator's Manual page 18

DESCRIPTION
SMART Mode Selection
AC TIG
When under AC/AC, Pulse TIG mode, press to select "SMART" mode. Please see below:
SMART
AC TIG AC TIG
SMART SMART
SMART OFF SMART ON
Fig 13 Operation Selection
When under SMART mode, one can press to select different welding angles according to actual application:
Flat Welding Angle Vertical Welding Angle Overhead Welding Angle
When under SMART mode, one can press to select aluminum plate thickness
18GA 1.0mm 16GA 1.3mm 16GA 1.6mm 1/8" 3.2mm 3/16" 5.0mm
15