Yeswelder CT2050 Operator's Manual page 23

Torch Assembling
Match Collet and Collet Body size tungsten electrode.
Ÿ
Thread the Collet Body into the front of the Torch.
Ÿ
Match the size of the Ceramic Nozzle to shielding gas requirements for workpiece material thickness (see Settings Chart). Thread
Ÿ
the correct Ceramic Nozzle onto Collet Body.
Insert Collet into Collet Body. Insert tungsten Electrode into Collet.
Ÿ
Lock Electrode in place with Back Cap. The electrode should protrude 1/8" to 1/4" beyond the Ceramic Nozzle.
Ÿ
1
1. Pyrex Glass Cup
2. Stubby Gas Lens
3. Temperature Resistant O-ring
4. Collet
5. Insulator Torch Body
6. Torch Head
7. Back Cap
3
2
4
5
6
20
7