Table of Contents
Advertisement
DISPLAY INSTALLATION
The installation consists of mounting the display inside the RV, programming, cutting and fastening the senders to the sides of the holding tanks, connecting the
wiring, and programming the display. When wiring DO NOT use spade connectors to join wires, only use crimp-on butt connectors or solder the wires together.
Display Panel Mounting Template
Mount the display by cutting a hole in the wall with the given dimensions plus
four screw holes. The thickness of the RV wall needs to be thick enough to retain
the screws. The panel will be mounted onto the wall using the four included
#4 screws, or different screws as required. The cutout diagram below is actual
size and can be used as a template. The depth of each model varies 1" - 1 3/8"
(25 - 35 mm), model dependent.
W
CAUTION: If mounting the display in a metal panel or wall there is a risk the display can short
circuit causing permanent damage. Non-conductive mounting spacers are available to purchase to
help prevent damaging the display. Contact Garnet or go to our website for further details. More
installation tips are available in the "Troubleshooting and Installation Tips" section.
SeeLeveL II 709 Series Display Manual
Connect Wiring to the Display
It is easier to connect the wiring to the display connector first, and
then plug the connector into the display panel. Refer to the wiring
diagram for your model from our Resource Library using the link
or QR code on page 4.
The senders need to be grounded to a single ground wire from the
display. Make sure that the system ground is connected to the
breaker panel ground.
W
WARNING: All power circuits must be fused. If a fuse is not
provided with the system then it is the installer's responsibility to install
a fuse with the maximum rating your model requires.
A relay may be required for models with a pump or heater switch.
For information about the requirements for your model please
refer to the specifications page and wiring diagram.
Display
connector
Page 5
Advertisement
Table of Contents
Troubleshooting
