Series Model Features Table; Model And Serial Number Info; Installation Information; Installation Documentation Downloads - Garnet SeeLeveL II 709 Series Installation Manual & User Manual

Series Model Features Table

Pump Pump
No. Switch Switch
Tanks 7.5 amp 10 amp
709-2P 2 .
709 3
.
709-P3 3
709-P3W 3 .
709-HP3W 3 .
709-BTP3 3 .
709-RVC 3
709-RVC PM 3 .
.
709-RVC NLP 3
709-N2K NLP
709-4 4
.
709-4P 4
709-4LP 4 .
W
CAUTION: If a pump or heater requires more amperage than the
switch allows, a relay is required.

Model and Serial Number Info

Before installing your system, look for the model and serial number on the
back of the display, as shown below. Write these numbers on the inside
cover of this handbook for future reference.
SeeLeveL II 709 Series Display Manual
Heater
Switch
10 amp LPG BATT RV-C
Bluetooth
.
. .
.
. .
. . .
. . .
. . .
. . .
. .
.
.
.
. .

INSTALLATION INFORMATION

The installation for the complete system consists of mounting the display
inside the RV, programming, cutting, and mounting the senders to the
sides of the tanks, connecting the wiring, and programming the display.
This manual provides information for all 709 series models. It is important
to read carefully for specific instructions about your model. See Series
Model Feature table to find out the features on each model.

Installation Documentation Downloads

Other documentation will be required to complete installation for your
specific model. Get them from our website Resource Library either by
selecting the link below or scan the QR code and search for your model.
garnetinstruments.com/holding-tanks-resource-library/
• Sender Installation Manual
• Wiring diagrams
• 709-BTP3 Bluetooth App manual (if equipped)
Specifications - download link at
•

Tools and Equipment to Install Display

□
screwdriver or power driver
□
wire cutters/stripper
□
wire crimper
□
electrical tape
□
butt connectors
□
saw to cut a hole for display (if required)
Optional items available to purchase if required. Go to our website for
more information:
□
Filler Panel to fit previous display hole that is too large.
□
Gasket to prevent the display monitor from shorting if mounting to a
metal surface.
RVgauge.com
RESOURCE
LIBRARY
Page 4