Table of Contents
Advertisement
Hardware Installation
Installation and initialization of ConnectX-4 Lx adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.
Safety Warnings
Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the
Mellanox's website.
Please observe all safety warnings to avoid injury and prevent damage to system components. Note
that not all warnings are relevant to all models,
Unable to render include or excerpt-include. Could not retrieve page.
Installation Procedure Overview
The installation procedure of ConnectX-4 Lx adapter cards involves the following steps:
Step
1
Check the system's hardware and software
requirements.
Pay attention to the airflow consideration within the
2
host system.
3
Unpack the product.
4
(Optional) Replace the full-height mounting bracket
with the supplied short bracket.
Install the ConnectX-4 Lx adapter card in the
5
system.
6
Connect cables or modules to the card.
7
Identify the ConnectX-4 Lx adapter card in the
system.
Adapter Installation Safety Instructions
Procedure
document available on
Direct Link
Refer to
System Requirements
Refer to
Airflow Requirements
Refer to
Unpacking the Product
Refer to
Bracket Replacement
Instructions
Refer to
Installation Instructions
Refer to
Cables and Modules
Refer to
Identifying the Card in Your
System
13
Advertisement
Table of Contents
Troubleshooting
