Total Values Print Configuration Page - ABB SR100A User Manual

...6 CONFIGURATION – ADVANCED LEVEL

6.1.5 Total Values Print Configuration Page

Information.
• Printing of totalizer identity, value and tag.
• Printing of individual values triggered from internal or external digital signal.
• Values can be printed via digital signal or at pre-configured time intervals.
Note. Totalizer values are always 'fast' printed.
TOTAL VALUES PRINT
CONFIGURATION
TOTAL 1 PRINT PEN
TOTAL 1 PRINT SOURCE
TOTAL WRAP
PAPER OUT ALARM
I/P FAILURE
DIGITAL I/P
CHART SPEED
LOGIC EQN
POWER FAILURE
REAL TIME ALM
PROCESS ALARM
NONE
TOTAL 6 PRINT PEN
TOTAL 6 PRINT SOURCE
56
Channel Values
11:28 T1 10903333
11:28 T2 22702221
11:28 T3 30004434
11:28 T4 44950394
11:28 T5 59573487
11:28 T6 46285746
Time Totalizer Value
Identity
ＡＢＢ记录纸记录笔打印头供应商：
广州绿图控仪器仪表有限公司
公司电话： ０２０－３４５１１９０９ １３０４２０８８１８１
公司传真： ０２０－３９０２１６１９
公司网站： ｗｗｗ．ｃｈａｒｔｇ．ｃｏｍ
Ｅ － ｍａｉｌ ：ｃｈａｒｔ＠ｃｈａｒｔｇ．ｃｏｍ
Totalizer Print Source and Pen
Select the source required to initiate printing of each of the six totalizers. The
totalizers can be printed in any of the available colors. Refer to Table 5.5 on page
43 for pen options.
TOTAL WRAP
PAPER OUT ALARM
I/P FAILURE
DIGITAL I/P
CHART SPEED
LOGIC EQN
POWER FAILURE
REAL TIME ALM
PROCESS ALARM
NONE
Select pen and source for all 6 totalizers.
Continued on next page.
LITRES Flow 1
GALS Flow 2
m3 Flow 3
LITRES Flow 4
GALS Flow 5
m3 Flow 6
Totalizer Units Totalizer Tag
– Wrap-around of a totalizer (T1 to T6)
– End of chart reached
– Failure of analog input (A1 to A6, B1 to B6)
– Active digital input (DA1 to DG3)
– Selection of chart speed (1 to 3)
– Logic equation true (1 to 10)
– After power failure
– Real time alarm on (1 or 2)
– Pre-defined process alarm (A to M, excluding I)
– No source selected – printing initiated at
automatic print time set above or by user in
– see Section 3.10.
Messages Page
Print