ABB SR100A User Manual page 79

...6.3.2 Operating Pages 1 and 2 Configuration Page
OPERATING PAGE
CONFIGURATION
TAG DISPLAY ENABLE
NO
YES
OPERATING PAGE
FRAME TO CONFIGURE
NONE
FRAME TYPE
PEN VALUE
DIGITAL
TOTALISER
STANDARD
OFF
OFF
PEN VALUE
TOTALISER
DIGITAL
or
STANDARD
FRAME SOURCE
Analog Input
Maths Result M
FRAME LOWER LINE
BARGRAPH
CHANNEL TAG
TOTALISER
FRAME SOURCE
TOTALISER T
FRAME SOURCE
DIGITAL I/P
CHART SPEED
LOGIC EQN
POWER FAILURE
REAL TIME ALM
PROCESS ALARM
SELECT PEN VALUES
PENS 1..3
PENS 4..6
Tag Display Enable
Select YES to enable the
YES
.
Page 2
NO
TAG
6789:;<=>?@ABCDEF
Frame to Configure
Eight separate frames can be programmed for each page to display analog,
digital or totalizer sources. These are displayed in sequence in
. On entry the default is NONE.
2
Select the frame to configure.
Frame Type
Select the frame required from the five frame types available (see Fig. 6.6, page 72):
PEN VALUE – Displays the inputs assigned to the pens
DIGITAL
TOTALISER – Any one of six totalizers
STANDARD
OFF
Frame Source (Standard)
Select any one of up to 12 analog inputs (A1 to A6, B1 to B6, depending on the
options fitted – see Section 4.2) or four math functions.
Frame Lower Line
Select one of the following:
BARGRAPH
CHANNEL TAG – Displays the tag allocated to the selected input source
Frame Source (Totalizer)
Select any one of up to six totalizers (T1 to T6).
DIGITAL
Frame Source (Digital)
Select the frame source from the six different digital input sources available:
DIGITAL I/P
CHART SPEED
LOGIC EQN
POWER FAILURE – The power failure alarm
REAL TIME ALM – Either of the two real time alarms
PROCESS ALARM – Any one of 12 process alarms
Select Pen Values
Select required pen value (1, 2 and 3) or (4, 5 and 6).
Return to
6 CONFIGURATION – ADVANCED LEVEL...
Operating Page 1
Page Tag
A page name of up to twenty characters can
be set on the upper display – see Front Fold-
out.
Up to 3 inputs can be displayed in one frame
– Any one of up to 47 sources from digital inputs, alarms,
logic equations or chart speeds
– Any one of up to 12 analog inputs (see Section 4.2) or four
math functions
– All but frame 1 of
Operating Page 1
– Displays a 100 segment bar graph.
– Any one of up to 19 digital inputs
– Any one of three pre-defined chart speeds
– Any one of up to 10 logic equations
frame.
Frame to Configure
tag (not available for
Operating
Operating Page 1 or
can be set to OFF
75