Figure 6-7: Wireless Security - Radius Screen; Figure 6-8: Wireless Settings - Wep Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
RADIUS
RADIUS Server IP Address. Enter the RADIUS server's IP address.
RADIUS Server Port. Enter the port number used by the RADIUS server.
Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server.
Default Transmit Key. Select a Default Transmit Key (choose which Key to use).
WEP Encryption. Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits).
Passphrase. If you want to generate WEP keys using a Passphrase, then enter the Passphrase in the field
provided and click the Generate key.
Key 1-4. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of
the letters "A" through "F" and the numbers "0" through "9". It should be 10 characters in length for 64-bit
encryption or 26 characters in length for 128-bit encryption.
WEP

Figure 6-7: Wireless Security - RADIUS Screen

WEP Encryption. Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits).
Passphrase. If you want to generate WEP keys using a Passphrase, then enter the Passphrase in the field
provided and click the Generate key.
Key 1-4. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of
the letters "A" through "F" and the numbers "0" through "9". It should be 10 characters in length for 64-bit
encryption or 26 characters in length for 128-bit encryption.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.

Figure 6-8: Wireless Settings - WEP Screen

Chapter 6: Configuring the Wireless-G Exterior Access Point 24
The Wireless - Wireless Security Tab