Linksys WAP54GPE User Manual page 24

Wireless-G Exterior Access Point
• Wireless Network Access. From this screen, you can permit or block access to your wireless network.
• Advanced Wireless Settings. Use this screen to configure the Access Point's more advanced wireless
settings.
AP Mode
Use this screen to configure how the Access Point will work with other access points in your network.
Administration
You will use the Administration tabs to manage the Access Point.
• Management. This screen allows you to customize the password and Simple Network Management Protocol
(SNMP) settings.
• Log. Configure the Log settings for the Access Point on this screen.
• Factory Default. Use this screen to reset the Access Point to its factory default settings.
• Firmware Upgrade. Upgrade the Access Point's firmware on this screen.
• Language Upgrade. On this screen, change the language of the Access Point's Web-based Utility.
• Reboot. Use this screen to reboot the Access Point.
• Config Management. You can back up the configuration file for the Access Point, as well as save the backup
configuration file to the Access Point.
Status
You will be able to view status information for your local network, wireless networks, and network performance.
• Local Network. This screen will display current information on the Access Point and its local network.
• Wireless. This screen will display current information on the Access Point and its wireless networks.
• System Performance. This screen will display current information on the Access Point and its data
transmissions.
Chapter 6: Configuring the Wireless-G Exterior Access Point
Navigating the Utility
snmp: the standard e-mail protocol on the Internet.
firmware: the programming code that runs a
networking device.
18