The Administration - Log Tab; Figure 6-16: The Administration - Log Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
SNMP Trusted Host. You can restrict access to the Access Point's SNMP information by IP address. Enter the IP
address in the field provided. If this field is left blank, then access is permitted from any IP address.
SNMP Trap-Destination. Enter the IP address of the remote host computer that will receive the trap messages.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.

The Administration - Log Tab

On this screen you can configure the log settings, as well as options for e-mail alerts of particular events.
Log
You can have logs that keep track of the Access Point's activities.
Email Alert
E-Mail Alert. To enable the Access Point to send e-mail alerts in the event of certain attacks (see the "Alert Log"
section below), select Enabled. If you do not want to have e-mail alerts, select Disabled.
E-Mail Address for General Logs. Enter the e-mail address that will receive general logs.
E-Mail Address for Alert Logs. Enter the e-mail address that will receive alert logs.
Return E-Mail address. Your mail server may require a return e-mail address. If so, enter that address here. If
you are not sure about what address to enter, enter the same e-mail address you entered above for the E-Mail
Address for Alert Logs field.
E-Mail Server IP Address. Enter the IP address or full mail server name (e.g., mail.domain.com) of your mail
server.s
Syslog Notification

Figure 6-16: The Administration - Log Screen

Syslog is a standard protocol used to capture information about network activity. The Access Point supports this
protocol and send its activity logs to an external server. To enable Syslog, select Enabled. If you do not want to
use Syslog, select Disabled.
Device Name. Enter a name for the Access Point.
Chapter 6: Configuring the Wireless-G Exterior Access Point 31
The Administration - Log Tab