Figure 6-3: Setup - Static Ip Address Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point
Select Static IP Address if you want to assign a static or fixed IP address to the Access Point. Then complete
the following:
• IP Address. The IP address must be unique to your network. We suggest you use the default IP address of
192.168.1.245.
• Subnet Mask. The Subnet Mask must be the same as that set on your Ethernet network.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen.
Chapter 6: Configuring the Wireless-G Exterior Access Point
The Setup Tab

Figure 6-3: Setup - Static IP Address Screen

static ip address: a fixed address assigned to a computer or
device that is connected to a network.
20