The Wireless - Wireless Connection Control Tab; Figure 6-12: Wireless Security - Radius - Linksys WAP54GPE - Wireless-G Exterior Access Point User Manual

Wireless-G Exterior Access Point

The Wireless - Wireless Connection Control Tab

This screen allows you to configure the Connection Control List to control the connection (association) of
wireless client devices.
Wireless Connection Control
Connection Control. Choose one of the three options to control the connection (association) of wireless
client devices.
• Disabled. The default setting.
• Prevent MAC Addresses (specific client devices) from connecting to the Access Point.
• Allow MAC Addresses (specific client devices) to connect to the Access Point.
Select MAC Address From Networked Computers
Instead of manually entering the MAC address of each client, the Access Point provides a convenient way to
select a specific client device from the client association table. Click this button and a window appears to let
you select a MAC address from the table. The selected MAC address will be entered into the Connection
Control List.
MAC 1-20. Enter the MAC addresses of the wireless devices you want to control.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes if you don't want to apply the changes. Help information is displayed on the right side of the
screen.
Chapter 6: Configuring the Wireless-G Exterior Access Point
The Wireless - Wireless Connection Control Tab

Figure 6-12: Wireless Security - RADIUS

Figure 6-1: Select MAC Address from Client
26