Using The Scan Timer; Sending The Scan; Figure 116: Scan Timer Button On The Toolbar And Scan Time - Align Technology iTero Element 5D User Manual

You can tap Return to Scanning to go back to Scan mode and rescan the missing segments, which are
highlighted in red in the navigation controls.
5.6.2

Using the scan timer

The scan timer enables you to see how long it took to scan the model.
To view the scan time:
1. On the toolbar, tap the
The scan time is displayed.

Figure 116: Scan timer button on the toolbar and scan time

2. Tap OK to close the window.
5.7

Sending the scan

After you have scanned the patient and reviewed the case to ensure that no data is missing, you can send the
scan to the lab or to storage, depending on the case type.
To send the scan:
1. Tap
on the toolbar to send the case, including the screenshots if any.
116
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
button.
© 2022 Align Technology, Inc. All rights reserved.