VARILITE VL4 Manual page 119

26-PIN BLACK
CONNECTORS
LOCATED ON
REAR OF PCB
Figure 3-22. Yoke Termination Board Removal and Replacement
02.9628.0010
7-Oct-97
Step 5. Replace yoke termination board by doing Steps 2 thru 4 in
reverse.
Note: 26-pin connector with blue heat shrink is connected to header
marked YOKE B (Blue) and 26-pin connector with yellow heat shrink is
connected to header marked YOKE A (Amber).
C 3. M
HAPTER AINTENANCE
3-73
P
ROCEDURES
6-32X5/16"PPB
SCREW
YTBVW1
CONFIDENTIAL