VARILITE PROFILE VL1600 Quick Start Manual

VL1600 PROFILE

OVERVIEW

This document provides basic setup instructions and safety
warnings for the following product(s):
VL1600 Profi le, black
VL1600 Profi le, white

INSTALLATION AND SETUP

CONNECTING POWER

This fi xture requires standard AC power distribution from 100-240VAC, 50/60 Hz. Current required
depends on the AC supply voltage and product model.
The mating Neutrik® powerCON® True1 connector is supplied; however, you will need to purchase or
NOTE:
construct a cable appropriate for your application.
Depending on the application, the luminaire's AC input cable may require
a diff erent connector. If required, install a new connector meeting your
requirements using the following wire color code reference:
WIRE*
Green/yellow
Blue
Brown
* International (Harmonized) Standard
WARNING:
X
G
Y
CURRENT VERSUS VOLTAGE
provides the luminaire's current draw at
TABLE 1
specifi c voltages. Total luminaire current is calculated
with the lamp on and all motors sequencing.

CONNECTING DATA

A maximum of 32 luminaires may be connected in
any one DMX data link.
This maximum limit applies to the luminaire "daisy
NOTE:
chain" only. Your system or console may require fewer
luminaires on a single data link path. Consult your console
documentation for more information.
CONNECTION
AC ground
AC neutral
AC line
DO NOT connect to three-phase service in countries with 240V power.
Single-phase power from 100-240V RMS:
CONNECTION
AC neutral
AC line
Ground (earth)
74016-001
74816-002
PIN
X
Y
G
TABLE 1. CURRENT VS. VOLTAGE (550W LED)
AC VOLTAGE
AT 60HZ
1
QUICK START GUIDE

INCLUDED ITEMS

QUICK START
GUIDE
VL1600 PROFILE
DATA
THRU
DATA IN
Three-phase power at 208V RMS:
CONNECTION
Phase 1
Phase 2
Ground (earth)
TOTAL LUMINAIRE CURRENT
(MOTOR + LAMP CURRENT)
100V 7.8A
110V 7.0A
120V 6.4A
130V 5.9A
200V 3.8A
210V 3.6A
220V 3.4A
230V 3.3A
240V 3.2A
443581625410 REV 00 10/21
POWER
CONNECTOR
WARRANTY
CARD
AC
POWER
NETWORK INPUT
USB AC
POWER
THRU
PIN
X
Y
G