VARILITE VL4 Manual page 109

#1
Figure 3-16. Douser Leaf Attachment Hardware Placement
02.9628.0010
7-Oct-97
#8
#2
#3
Figure 3-15. Douser Leaves Removal and Replacement
Step 5. Replace douser leaves.
a. Undamaged leaves and washers may be reused.
b. Starting at standoff number 1, moving counterclockwise,
install douser leaves. Leaves on standoffs 2 thru 7 lay partly
on top preceding leaf. Leaf on standoff number 8 rests on
top of leaves on standoffs 1 and 7.
c. Complete bulkhead assembly and installation by doing Steps
2 thru 9 in reverse. Refer to Figure 3-16 for placement of
douser leaf attachment hardware. Be careful to not clamp
down on 0.35 dia. X 0.010 thick washer.
Step 6. Calibrate dashpots. Refer to Douser Dashpot Calibration
paragraph.
C 3. M
HAPTER
#7
#6
#5
#4
0.5 DIA. X 0.010 TH WASHER
P
AINTENANCE ROCEDURES
STANDOFF
DOUSER RING
DOUSER LEAVES
LEAF NUB SLOT
DFDVW5
LEAF NUB
TRUSS HEAD SCREW
ROLLER
DOUSER RING
0.35 DIA X 0.010 TH
WASHER
DOUSER LEAF
3-63
RINGDETL
CONFIDENTIAL