Advertisement
TOYOTA
Procedure
Fig. 11-1
10mm socket & torque wrench
Fig. 12-1
Issue: D 4/14/2021
VENZA
Page 10 of 11 pages
2021 - DASHCAM (Digital Video Recorder)
NOTE: Do not block access to the indicated
clip hole or else roof console may not attach
correctly.
(i) Clip off extra wire tie length.
11. Reassemble the console
(a) Reconnect roof console connector.
(b) Reinstall roof console (Fig. 11-1).
(1) Engage front hooks of the roof
console into the headliner opening.
Tilt up and push upward to engage
the clips into the roof.
NOTE: Make sure to align clip holes before
pushing up to avoid damage to clips.
(c) Place the Quick Start Guide in the Glove
Box.
12. Reconnect Battery.
(a)
Reconnect the negative battery cable
(Fig. 12-1).
Torque:
5.4 N•m (48 in•lbsf)
CAUTION: Do not
with any
tool.
13. Reinstall Battery Cover and Remove
Protective Covering
(a) Reinstall battery service hole cover in step 1c
(b) Remove and discard vehicle protective
covering
touch the positive terminal
DIO
Advertisement
