Table of Contents
Advertisement
BD-VOIP-128S User Manual
4.13.8
Record Parameter
After configuring the record server, you can upload the call voice of the FXS port of the
device to the record server. The record configuration page is shown in Figure 4.12-8:
Table 4-24 Explanation of Record Parameters
RCD
Server Address
Rcd Port
Rcd Period Select
Rcd Directly To
Server
4.13.9
Radius Parameter
After the Radius server is configured, you can log into the gateway after successful Radius
authentication. The Radius server configuration page is shown in Figure 4.12-9:
Website: www.baudcom.com.cn
Enable or disable the record function
Set the record server address, IP address or domain name
Recording server port (The default is 2999)
Only record within the set time range, support 3 recording periods
In the NAT environment, the recording can be directly sent to the
public network
Email:
info@baudcom.com.cn
4 Configurations on Web Interface
71
Advertisement
Table of Contents
