Ip  Tel Routing - Baudcom BD-VOIP-128S User Manual

BD-VOIP-128S User Manual
Table 4-14 Explanation of Routing Parameters
Calls from IP
Calls from
Analog Line
4.11.4
IP  Tel Routing
Calls from IP network can be routed to FXS port or port group of the BD-VOIP-128S device
through IP Tel routing.
Figure 4-21 Add IP Tel Route
Table 4-15 Parameter Explanation of IP Tel Routes
Index
Description
Calls from
Caller Prefix
Callee Prefix
Calls to
Website: www.baudcom.com.cn
Choose calls from IP network are routed before manipulation or after manipulation.
Choose calls from analog lines are routed before manipulation or after manipulation.
Index of the IP Tel routing; range is from 0 to127; 0 is the highest priority.
Description of the IP Tel routing; it is used to identify the IP  Tel
routing.
Choose calls from IP trunk or SIP server; 'any' means any IP addresses.
The prefix of the caller number, which helps match routing exactly. Its
length is less than or equal to the caller number. For example, if caller
number is 2001, the caller prefix can be 200 or 2. 'Any' means the prefix
matches any caller number.
The prefix of the called number, which helps match routing exactly. Its
length is less than or equal to the called number. If the called number is
008675526456659, the called prefix can be 0086755 or 00.,"any" means
the prefix matches any called number
Which port or port group to which calls are routed.
Email: info@baudcom.com.cn
4 Configurations on Web Interface
58