Table of Contents
Advertisement
INSTALLATION (NEW CONSTRUCTION) CONTINUED
Install grille
1
Receptacle
LED lamp wire
MAINTENANCE (CLEANING)
Disconnect power supply before working on unit.
Routine maintenance must be done every
year. Please wear gloves during the
cleaning work.
Never use gasoline, benzene, thinner or
any other such chemicals for cleaning the
ventilating fan.
Remove grille
Mounting spring
Gloves
1
Remove grille by pulling down one mounting spring.
2
Disconnect the wire from the receptacle, then pull down the other mounting spring.
Maintenance of unit
1
NOTE : The grille should be dry after cleaning.
1
Clean grille. (Don't put into hot water. Use non-abrasive kitchen detergent, wipe dry with clean cloth.)
2
Remove dust and dirt from fan body using a vacuum cleaner.
3
Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with a clean cloth.
Reinstall grille after finishing.
Drywall
2
Mounting spring
Grille
1
Slot
Gloves
1
Connect the LED lamp wire to fan body.
2
Insert the mounting springs into the slot as
shown to mount grille to fan body.
Glove
Receptacle
Grille
Drywall
Vacuum
cleaner
2
Do not immerse motor in water when
cleaning. Do not soak resin parts in
water over 140 °F (60 °C).
2
LED lamp wire
Mounting spring
Gloves
Drywall
Drywall
3
11
English
Hide quick links:
Advertisement
Table of Contents
