Diagnostics Of The Module In Dpv1; Dpv1 Error Codes - Eaton XNE-2CNT-2PWM User Manual

10 Representation of the XNE-2CNT-2PWM in PROFIBUS-DPV1

10.2 Diagnostics of the module in DPV1

10.2 Diagnostics of the module in DPV1
10.2.1

DPV1 error codes

Table 23: Error code
DPV1 error (acc. to DPV1 standard)
codes
4
16
27
102
XI/ON: XNE-2CNT-2PWM 04/2011 MN05002035Z-EN www.eaton.com
Note
The module XNE-2CNT-2PWM can only be used with the XI/ON DPV1 gateways.
These gateways support the diagnostic function according to PROFIBUS DP speci-
fication IEC/EN 61158, type 3.
Please read the corresponding gateway manuals for the description of the diagnostic
message structure of the DPV1 gateways (→ see Additional documentation
(page 7)).
Diagnostic messages
overload
parameterization error
unknown error
Channel
PWMx (Px, Dx)
CNTx, PWMx
reserved
Message
P1_DIAG
P2_DIAG
D1_DIAG
D2_DIAG
CNT1_PAR _ERR
CNT2_PAR _ERR
PWM1_PAR _ERR
PWM2_PAR _ERR
-