Viewing The Hardware Monitor - Linksys NSS4000 Series Administrator's Manual

Viewing the Hardware Monitor

The Hardware Monitor page displays details about the following physical conditions related to the
NSS:
• Voltages: The current voltage reading for all voltage rails in the system. The reading is color-
coded depending on whether the voltage level is within specification (green) or out of
specification and in need of attention (red).
• Fans: The fan speed for each chassis fan. If the fan has stalled, the reading is color-coded
red. Normal fan operation is color-coded green.
• Temperatures: The NSS has temperature sensors located at various parts of the chassis.
Temperature readings are done from these sensors as well as from any installed disks
(provided that the disk has an internal temperature sensor). If a disk does not have a
temperature sensor, the reading appears as "unavailable". If the temperature of the system or
disks is over or under the ideal temperature, the temperature is color-coded red. When the
temperature is within the normal range the color-coding is green.
Chapter 2: System
Viewing the Hardware Monitor
Network Storage System (NSS) Administrator Guide
Chapter
2
11