Configuring The System For Ups Support - Linksys NSS4000 Series Administrator's Manual

Configuring the System for UPS Support

You can set up the NSS to use an uninterruptible power supply (UPS) if one is connected directly to
the UPS port on the NSS.
To set up the UPS:
1. From the Manager Menu, click System
The System Power page appears.
2. To enable UPS support, select Enable UPS support.
3. Click Update.
Chapter 2: System
Configuring the System for UPS Support
Network Storage System (NSS) Administrator Guide
Power.
Chapter
2
14