Linksys NSS4000 Series Administrator's Manual page 25

• Label: Enter a text description for the VLAN (for example, "Data", "Voice", "Video", etc.). It
can be made up of alphanumeric characters. Note that this description is used solely as a
reference within the NSS interface and does not affect its operation.
3. Click Add.
The newly added VLAN appears in the VLAN Configuration table. The VLAN configuration
ONLY takes effect after you configure the IP address for the VLAN. A message appears to
advise that the VLAN does not take effect until you configure the IP address.
4. Click OK.
The Network IP page appears. The newly added VLAN appears in the list.
5. Click Edit for the VLAN.
Chapter 3: Network
Allowing a VLAN Access to the NSS
Network Storage System (NSS) Administrator Guide
Chapter
3
23