Linksys NSS4000 Series Administrator's Manual page 79

NSS. A domain user's primary group is set up from the domain and is not derived
from the Primary Group field in the NSS user profile.
5. Assign a password by entering any valid (ASCII table) characters in the Password field. The
password is required.
6. To verify the password, re-enter it in the Confirm Password field.
NOTE: All password changes to end-user accounts set up through the NSS configuration
pages must be made by the administrator.
7. To record the user's full name, enter it in the Real Name field. This field is optional. Note that you
cannot enter the "/" character in this field.
8. To record the user's email address, enter it in the Email Address field. This field is optional.
9. Click OK to create the user and exit the New User page. Click Apply to create the user and then
add another new user.
Chapter 5: Access
Creating a User Profile
Network Storage System (NSS) Administrator Guide
Chapter
5
77