Integrating Groups From An Active Directory, Ntv4, Or Nis Domain - Linksys NSS4000 Series Administrator's Manual

Integrating Groups from an Active Directory, NTv4, or NIS
Domain
When the NSS is joined to an Active Directory, NTv4, or NIS domain, domain groups are imported
into the Configured Groups list. Group membership for imported domain groups are read-only. The
naming conventions use the NetBIOS format with the domain name as a prefix of the group name.
For example, "DOMAINNAME\GroupName"
NOTE: It is important to set up your User and Group ID ranges before you join the NSS to
an ADS, NTv4, or NIS domain. After you join the NSS to a domain, you should not
make changes to the range as this might lead to an ID collision.
Chapter 5: Access
Integrating Groups from an Active Directory, NTv4, or
Network Storage System (NSS) Administrator Guide
Chapter
5
86