Deleting An Array - Linksys NSS4000 Series Administrator's Manual

Deleting an Array

You can remove an existing array and release the disks used in the array back into available storage.
Note that deleting an array also deletes any existing data on the array (including the volumes, shares,
and quotas). If you delete an array that contains the volume that is used as the location of your users'
Home Directories, note that you must assign a new volume as the Home Directory location.
To delete an existing array:
1. From the Manager Menu, click Storage
The RAID page appears.
2. Click Delete in the row of the RAID array that you want to delete.
A warning message appears.
3. To continue, click OK.
The deleted array disappears from the list of existing arrays. The disks used in the array are
released back into available storage and appear in the New RAID Device table.
Chapter 4: Storage
Deleting an Array
Network Storage System (NSS) Administrator Guide
RAID.
Chapter
4
47