Subscribe to Our Youtube Channel
Related Manuals for Kraus Aplos KEF-15301
Summary of Contents for Kraus Aplos KEF-15301
- Page 1 I N S TA L L AT I O N MA N UA L Aplos Single Lever Basin Faucet KEF-15301 www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
- Page 2 Thank you for purchasing Kraus We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your experience. We welcome any questions or comments you may have, and will be glad to assist you in the future.
-
Page 3: Prior To Installation
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800- 775-0703 for a replacement • Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure •... - Page 4 Diagram and Parts List 26 27...
- Page 5 Tools you will need: Diagram and Parts List 1. (A) Index Button (B) Set Screw 2. Metal Handle 3. Cartridge Cover 4. Locking Nut Adjustable Wrench 5. Cartridge 6. Faucet Body 7. Rubber Washer 8. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut Silicone Sealant...
- Page 6 Faucet Installation Procedure 120mm (4.72”) Ø35mm (1.37”) G1/2 Installer Tip: Shut off main water supply before installing new faucet...
- Page 7 Faucet Installation Procedure 58mm (2.28”) Ø35mm (1.37”) G1/2...
- Page 8 Step1: Remove mounting hardware Remove the mounting screws (8D), mounting nut (8C), metal washer (8B), and rubber washer (8A) from the mounting pipe Step 2 Step Step 2: Install hot & cold waterlines Place faucet on a soft cloth, Step5 spout facing up.
- Page 9 Step 3 Step 3: Install faucet Install faucet through 1-3/8” predrilled hole in countertop. Attach rubber washer (8A), metal washer (8B), mounting nut (8C), and mounting screws (8D) on the threaded mounting pipe. Tighten mounting nut (8C) until snug. Tighten screws (8D) on mounting nut (8C) with Phillips head screwdriver until snug...
- Page 10 Step 4: Install drain 1. Remove waste stopper (16) from drain (17). Remove drain body (22), mounting nut (21), plastic washer (20), and concave washer (19) from drain (17) 2. Insert lift pole rod (13) through the hole in the back of the faucet body (6).
- Page 11 Step4 Step 4: (Continued) 26 27...
- Page 12 Step6 Step 5: Connect waterlines to main valve Connect flex water supply lines to angle stops and tighten with adjustable wrench. Turn on both hot and cold main valve Apply pipe tape (optional) Step 6: Flush faucet After installing faucet, remove Step6 aerator (9) with included aerator key (10).
-
Page 13: Troubleshooting
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: P R O B L E M C A U S E A C T I O N Leakage under the Locking nut (4) has Remove handle... -
Page 14: Conditions And Exclusions
If Kraus is unable to provide a replacement and repair is not practical or cannot be made in timely fashion, Kraus may elect to refund the purchase price in exchange for the return of the product. - Page 15 NON-APPLICABILITY OF THIS WARRANTY By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product. This includes freight costs,...
- Page 16 www.kraususa.com...
Need help?
Do you have a question about the Aplos KEF-15301 and is the answer not in the manual?
Questions and answers