LINOVISION IOT-C300-LORA Quick Start Manual page 21

2. Set a IF conditionbased on the terminal device data or IOT-C300-LORA device status.
Condition Description
Set the time condition. The device time will be synced once after
Time joining/registeringto network, you can also sync the time manually on "Status"
page.
When IOT-C300-LORA device detects the DI as a specific status.
Is continuedfor: the DI changed status should last for some time.
Digital Input
Set lockouttime: after the lockout time, IOT-C300-LORA will detect if DI status
matches the condition. 0 means this IF condition will only be detected once.
21