Table of Contents
Advertisement
settings should be the same as the RS485 terminal devices.
Parameters
Enable
Allow the device to collect RS485 data and upload the data.
Stop Bit
1 bit/2bit are available.
Data Bit
8 bit is available.
Parity
None, Odd and Oven are available.
Baud Rate
1200/2400/4800/9600/19200/38400/57600/115200are available.
Execution Interval
The execution interval between each Modbus channel command.
(ms)
The maximum response time that the IOT-C300-LORA waits for the
Max Resp Time
reply to the command. If it does not get a response after the max
(ms)
response time, it is determined that the command has timed out.
Max Retry Time
Set the maximum retry times after device fails to read data from RS485
(ms)
terminal devices.
Modbus RS485
If this mode is enabled, the device will transmit Modbus RTU commands
bridgeLoRaWAN
from network server to RS485 terminal devices transparently and send
®
(LoRaWAN
Modbus reply originally back to the network server.
Version Only)
Port: Select from 2-84,86-223.
3. Click
to add Modbus channels, then save configurations.
Description
16
Advertisement
Table of Contents
