Table of Contents
Advertisement
Safety Precautions
Linovision will not shoulder responsibility for any loss or damage resulting from not following
the instructions of this operating guide.
The device must not be remodeled in any way.
❖
❖
Do not place the device close to objects with naked flames.
Do not place the device where the temperature is below/above the operating range.
❖
Power off the device when installing or wirings.
❖
Make sure electronic components do not drop out of the enclosure while opening.
❖
The device must never be subjected to shocks or impacts.
❖
Declaration of Conformity
IOT-300-LORA is in conformity with the essential requirements and other relevant provisions of
the CE, FCC, and RoHS.
Copyright© 2011-2022Linovision. All rights reserved.
All information in this guide is protected by copyright law.
Revision History
Date
Mar. 17, 2022
Doc Version
Description
V 1.0
Initial version
For assistance, please contact
Linovision technical support:
Email: sales@hinovision.com
Tel: +1(469)-444-2999
URL:support.linovision.com
Address: 701 E Plano Parkway, Ste 100
Plano, Texas, 75074 U.S.A
2
Advertisement
Table of Contents
