Table of Contents
Advertisement
PORT STATUS AND CONFIGURATION MENU
Port Status may be reviewed by turning to encoder knob to reach the desired port, from the main screen showing the switch
name and IP address. The LCD shows the following information.
<Switch Name>
IP: 10.30.142.169/8
The port's soft label is shown on the top line. By default, the label is the port number. Below is shown the port number and
the link status or speed. If VLANs are enabled, the bottom line shows the VLAN ID# currently assigned to the port.
From the Port Status screen of the desired port, push the button. The Port Configuration menu will be shown.
Some menu items may not be displayed; ie. VLANs, LLDP Link Partner, Current Multicast Groups, if VLANs are not enabled,
or LLDP-compliant devices are not detected.
VLAN TYPE
VLANs must be enabled from the Advanced Settings menu for this option to be shown.
Menu Item
Untagged (Normal)
Tagged (Uplink)
<Back>
55
Port <x> Configuration
VLAN: Untagged (Normal)
VLAN ID: <x>
Artnet Input Handler: Pass All
PoE: Enabled
PoE Setup/Status
Link Mode: Auto Negotiate
LLDP Link Partner
Bandwidth Use: 1%
Current Multicast Groups
Only data belonging to the port's specified VLAN ID# will be transmitted. Typically connected
to end equipment
All traffic on all VLANs will be transmitted. Typically connected to another switch.
Return to previous menu.
VIA12 [6750, 6750-P, 6752-P, 6754-P] - Manual
<Port Name>
Port <x>: <Link Speed>
<Back>
Description
<VLAN ID#>
REV 1.0 • June 2020
Advertisement
Table of Contents
