Menus; Network Setup - Acuity Brands Lighting Pathway VIA 12 Series User Manual

Some menus, such as Network Settings, require the user to scroll down to accept or discard any changes made. The <Back>
option will always move the menu up one level. The current menu will time out after approximately 30 seconds.
FRONT PANEL LOCKOUT
If using Pathscape, it is possible to enable the option Front Panel Lockout, which disables the ability to make any changes
to the switch from the front panel UI. You can still navigate the menus to review settings, but cannot change any properties.
The Front Panel Lockout is temporarily disabled for 30 seconds after the switch boots up. This window allows for changes to
be made when a Pathscape connection is not available.
NOTE: It is not possible to disable the Front Panel Lockout from the front panel itself; it must be done from
Pathscape.

MENUS

NETWORK SETUP

This menu allows review and changes to the switch IP mode, IP address, subnet mask, and default gateway. These settings
are the default values for the Management VLAN (typically VLAN 1) and will be used if VLANs are disabled. Scroll the encoder
knob to highlight the property you want to edit, and push the knob to edit the value. Scroll the knob again to choose the new
value, and push the knob to confirm.
Depending on the item you are editing, you may have to scroll down to select the <Back> option to return to the previous
menu, or select Save and Apply to confirm. In some menus you may also select Discard Changes to return to the previous
menu without committing changes.
Menu Item
IP Mode
IP Address
41
Network Setup
IP Mode: Static
IP Address: 10.30.142.169
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1
<Back>
Determines how the VLAN's IP settings will be obtained.
Static (default for VLAN 1): IP Settings manually set by user.
Dynamic: IP Settings will be obtained from a DHCP server.
<Back>: Return to previous menu
Manually sets IP address (IPv4).
Turn encoder to set each octet. Push to accept and move to next octet. Illegal values
are not accepted.
VIA12 [6750, 6750-P, 6752-P, 6754-P] - Manual
Description
REV 1.0 • June 2020